Switching and Transmission Risk
Switching operations and work on transmission infrastructure carry direct arc flash exposure. An Arc Flash risk assessment defines the actual cal/cm² rating needed for each task, site to site.
SECTOR
Power Generation
Arc Flash protection for teams working across power stations, transmission, and renewables.
Protecting Power Generation Teams from Arc Flash Risks
Power stations, transmission infrastructure, and renewables all bring teams into contact with high-voltage systems, often outdoors, often in exposed conditions. The risk doesn't stop at the switchgear, weather and site conditions matter just as much to what your team needs to wear.
RIDDOR doesn't track arc flash separately from general electrical incidents, so there's no clean UK figure, but HSE records around 1,000 electrical incidents a year, and in our own research, 57% of electrical workers said they'd experienced an arc flash first-hand or seen it happen to a colleague.
AS ARC FLASH SPECIALISTS WE CAN HELP YOU
Contact Us NowSUPPORTING STANDARDS
What Power Generation Teams Face
The risks that shape what your team needs to wear.
Exposed Site Conditions
Power stations and transmission sites are often outdoors and exposed to the elements. Garments need to protect against arc flash and keep your team warm and dry, without adding bulk that gets in the way.
Renewables Infrastructure
Solar and grid-connected renewables still carry electrical risk at the point of connection to the network, arc flash protection doesn't stop being relevant just because the source is renewable.
Long Shifts, High-Heat Environments
Boiler rooms, turbine halls, and plant maintenance often mean long hours in demanding conditions. Comfort isn't a nice-to-have here, it's what keeps PPE worn correctly rather than loosened or left off.
Not All Arc Flash Clothing Is the Same
Some garments look like they'll protect your team and don't hold up once you check the rating, the fit, or how it's actually worn on site. We've seen teams assume they're covered when the garment, or the way it's worn, doesn't match the risk. Getting the spec right matters as much as the garment itself.
As Comfortable as Pyjamas. Built to Last.
Our VXS+ fabric is 100% inherent, so protection doesn't wash out over time. Garments last up to 70% longer than standard alternatives, and every seam is backed by a Lifetime Guarantee. Fewer replacements, same protection.
CERTIFIED PRODUCTS
37 ProGARM products certified to EN 61482-2
Standards that apply to the industrial electrical sector.
ALL RESOURCES
The Resources Specifiers Actually Use
Standards explained. Cal ratings decoded. Checklists you can audit against.
Guide
What Causes an Arc Flash?
An important factor in keeping yourself safe is knowing the causes of Arc Flash incidents.
5 min read
Guide
Arc Flash – Illusion of Safety
This paper explores how to dispel the Arc Flash illusion of safety and stop complacency from being a…
10 min read
Guide
5 Ways Arc Flash PPE Saves Lives
There’s no disputing the danger posed by arc flash incidents, but you might not realise just how our…
5 min read
Guide
What is ELIM?
When clothing needs to be able to save your life, you’re going to want some guarantees it’s up…
12 min read
Guide
Arc Flash vs Flame Resistant Clothing
It’s a question we’re asked on a regular basis – what’s the difference between Flame Resistant garments and…
5 min read
Guide
What is an Arc Flash?
10 min read
Frequently asked quesitons
How do we know if we need Arc Flash PPE?
Keeping your team safe is always top priority. Your team need to be protected against an Arc Flash incident if there is a risk of one occurring whilst they work. If your teams work in industries close to sources of high voltage, there is a good chance they need protection. A first step is to conduct an Arc Flash study at your site, a risk assessment that determines the Arc Flash hazards present. An expert in electrical safety conducts the assessment so a company understands the risks their workplace poses, and how to protect against them.
What does an Arc Flash study involve?
Keeping your team safe is always top priority. Your team need to be protected against an Arc Flash incident if there is a risk of one occurring whilst they work. If your teams work in industries close to sources of high voltage, there is a good chance they need protection. A first step is to conduct an Arc Flash study at your site, a risk assessment that determines the Arc Flash hazards present. An expert in electrical safety conducts the assessment so a company understands the risks their workplace poses, and how to protect against them.
Who needs to carry out an Arc Flash study?
Keeping your team safe is always top priority. Your team need to be protected against an Arc Flash incident if there is a risk of one occurring whilst they work. If your teams work in industries close to sources of high voltage, there is a good chance they need protection. A first step is to conduct an Arc Flash study at your site, a risk assessment that determines the Arc Flash hazards present. An expert in electrical safety conducts the assessment so a company understands the risks their workplace poses, and how to protect against them.
SECTORS
