Electrification Risk
Working near overhead line equipment or third rail systems carries a direct arc flash risk. An Arc Flash risk assessment defines the actual cal/cm² rating needed for each task.
SECTOR
Rail
Arc Flash protection for teams working on electrification, groundworks, and trackside maintenance.
Protecting Rail Teams from Arc Flash Risks
Electrification and groundworks bring rail teams close to live electrical systems, and often close to moving trains at the same time. HSE's HSG47 guidance flags groundworks as a real source of risk, and on rail specifically, staying visible matters just as much as staying protected.
Our hi-vis orange range is built to comply with RIS-3279-TOM, which replaced the older GO/RT 3279, so your team can meet the standard without switching to a different supplier for arc flash and hi-vis separately.
AS ARC FLASH SPECIALISTS WE CAN HELP YOU
Contact Us NowSUPPORTING STANDARDS
What Rail Teams Face
The risks that shape what your team needs to wear.
High-Visibility Compliance
Trackside and lineside work requires RIS-3279-TOM compliant hi-vis. Our combined Arc Flash and hi-vis range means your team meets both standards without doubling up on kit.
Groundworks and Cable Strikes
HSG47 identifies groundworks as a major source of risk, an unmarked or misjudged cable strike can trigger an arc flash with little warning.
Weather and Long Shifts
Trackside work often means long hours outdoors, whatever the weather. Garments need to protect against arc flash and keep your team comfortable, without adding bulk that slows the job down.
Not All Arc Flash Clothing Is the Same
Some garments look like they'll protect your team and don't hold up once you check the rating, the fit, or how it's actually worn on site. We've seen teams assume they're covered when the garment, or the way it's worn, doesn't match the risk. Getting the spec right matters as much as the garment itself.
As Comfortable as Pyjamas. Built to Last
Our VXS+ fabric is 100% inherent, so protection doesn't wash out over time. Garments last up to 70% longer than standard alternatives, and every seam is backed by a Lifetime Guarantee. Fewer replacements, same protection.
CERTIFIED PRODUCTS
37 ProGARM products certified to EN 61482-2
Standards that apply to the industrial electrical sector.
ALL RESOURCES
The Resources Specifiers Actually Use
Standards explained. Cal ratings decoded. Checklists you can audit against.
Guide
What Causes an Arc Flash?
An important factor in keeping yourself safe is knowing the causes of Arc Flash incidents.
5 min read
Guide
Arc Flash – Illusion of Safety
This paper explores how to dispel the Arc Flash illusion of safety and stop complacency from being a…
10 min read
Guide
5 Ways Arc Flash PPE Saves Lives
There’s no disputing the danger posed by arc flash incidents, but you might not realise just how our…
5 min read
Guide
What is ELIM?
When clothing needs to be able to save your life, you’re going to want some guarantees it’s up…
12 min read
Guide
Arc Flash vs Flame Resistant Clothing
It’s a question we’re asked on a regular basis – what’s the difference between Flame Resistant garments and…
5 min read
Guide
What is an Arc Flash?
10 min read
Frequently asked quesitons
How do we know if we need Arc Flash PPE?
Keeping your team safe is always top priority. Your team need to be protected against an Arc Flash incident if there is a risk of one occurring whilst they work. If your teams work in industries close to sources of high voltage, there is a good chance they need protection. A first step is to conduct an Arc Flash study at your site, a risk assessment that determines the Arc Flash hazards present. An expert in electrical safety conducts the assessment so a company understands the risks their workplace poses, and how to protect against them.
What does an Arc Flash study involve?
Keeping your team safe is always top priority. Your team need to be protected against an Arc Flash incident if there is a risk of one occurring whilst they work. If your teams work in industries close to sources of high voltage, there is a good chance they need protection. A first step is to conduct an Arc Flash study at your site, a risk assessment that determines the Arc Flash hazards present. An expert in electrical safety conducts the assessment so a company understands the risks their workplace poses, and how to protect against them.
Who needs to carry out an Arc Flash study?
Keeping your team safe is always top priority. Your team need to be protected against an Arc Flash incident if there is a risk of one occurring whilst they work. If your teams work in industries close to sources of high voltage, there is a good chance they need protection. A first step is to conduct an Arc Flash study at your site, a risk assessment that determines the Arc Flash hazards present. An expert in electrical safety conducts the assessment so a company understands the risks their workplace poses, and how to protect against them.
