Logo
closeIcon
User IconAccountBasket Icon Basket
Search s Icon
  • User Icon
  • Search Icon

My basket

There are no items in your cart.

WHAT IS ARC FLASH?

Find out what it is, what causes it and how to prevent it

VIEW ALL ARC PRODUCTSQuestions? Contact Us

AS ARC FLASH SPECIALISTS WE CAN HELP YOU

Contact Us Now

ARC FLASH PROTECTION

Awareness of the dangers of Arc Flash incidents and the need to protect your team with specialist Arc Flash protection is more important today than it has ever been. A focus on Arc Flash protection will only increase as you become more aware of the dangers an Arc Flash incident can pose.

A fundamental aspect of your role is to understand how these risks can be mitigated, whether you are operating in an industrial electrical, power generation or petrochemicals environment, breaking ground in a utility company or undertaking work on the railways.

Mitigating risk with safe working practices and by providing appropriate garments that offer superior Arc Flash protection saves lives every day.

What is an Arc Flash?

An Arc Flash occurs when an electrical discharge travels through the air and releases an intense burst of energy. This flash is capable of causing serious harm to anyone caught by it, so adequate Arc Flash protection is of the utmost importance.

The energy expelled by an Arc Flash event can be deadly, with temperatures reaching up to 35,000ºF or more than 19,000ºC. It goes without saying; this can burn clothing and human skin within fractions of a second, even if the operative is situated five or six metres away from the Arc Flash event.

The cause of an arc flash typically stems from contact between an energized conductor, such as a bus bar or wire, and another conductor or grounded surface. This can occur due to equipment failure, uninsulated tools, or damaged cables. While it is often assumed that high voltage systems are more prone to arc flash incidents, studies have shown that low voltage systems can be equally, if not more, hazardous. Variables such as the current flow, gap size between conductors, electrode composition, and surrounding environmental factors all influence the severity of the arc flash.

WHAT ARE THE CAUSES OF ARC FLASH?

EQUIPMENT FAILURE

It stands to reason that if equipment fails or is improperly designed or installed, an Arc Flash incident could be caused. Faulty system design can also contribute to an increased likelihood of Arc Flash incidents, also known as electrical flashovers. Damage to insulation, gaps, or wear and tear can also create the pathways needed for an unwanted electric discharge through the air. Exposed live parts or loose connections could also be the culprits. Regular inspections of your electrical systems and equipment will help to predict and prevent Arc Flash incidents.

SPONTANEOUS

There are other factors which can increase the likelihood of an Arc Flash incident. These causes include:

– Corrosion of electrical equipment

– A build up of dust, which can conduct an electrical charge

– Moisture or vapor, which can also conduct an electrical charge

– Animal contact – mice, for example, can create the route needed for an Arc Flash to occur

HUMAN ERROR

Human error is the most common cause of Arc Flash incidents. It could be a gang breaking ground and hitting a cable not marked on the services plan, a test probe touched to the wrong surface, or a tool dropped accidentally which hits a live switchgear.

Other ways that human error can cause an Arc Flash are through the improper installation of equipment, preventative maintenance that isn’t carried out properly (or at all) and failing to de-energise equipment where it’s possible. A lack of appropriate training can increase the chances of human error causing an incident. But distractions, weariness, the pressure to get the job done quickly and restore power, or just an overly-relaxed attitude can make electrical engineers bypass safety procedures, which can all too easily result in a dropped tool or making contact between energised conductors.

Arc Flash - 4 P's Protect Predict Prevent Publish

THE 4P METHODOLOGY

The 4P methodology simplifies hazard assessments into four steps:

Predict
An educated prediction on the severity of an Arc Flash following an assessment.

Prevent
Prevent any damage through hazard mitigation. This includes reducing the risks and mitigating hazards.

Protect
Protect workers from residual hazards using PPE and procedures.

Publish
Publish the results with the wider team and provide training.

ALL OUR ARC STANDARDS

Purchasing products which conform to EN Standards guarantees your team is protected.

Depending on which sector you operate in, the EN Standards that matter to your business may differ slightly if your industry requires Arc Flash clothing. However, it’s vital that you equip your team with protective clothing that conforms to IEC 61482. This is the international standard applicable to Arc Flash and flash fire hazard protection.

All ProGARM Arc Flash garments are rigorously tested to the Open Arc and Box Arc methods, providing protection across our range. EN ISO 11612 certified garments provide protection against heat and flame. This protects against hazards including radiant heat, convective heat and splatters of molten metal, although it is not a substitute for clothing made to withstand high temperatures for longer periods of time.

The specifications for each standard that ProGARM Arc Flash garments conform to are provided both on our website and in our brochure. You can be sure that you’re equipping your team with clothing designed to protect them in the field, whichever sector you operate in.

arc Image

EN 1149-5

The European Standard for garments that protect against electrostatic discharge in areas where there is a risk of explosion (ATEX Environments) such as petrochemical refineries and fuel distribution companies.

Find Out More
arc Image

RIS-3279-TOM

The high visibility standard that applies to the rail industry in the UK and ensures rail workers on or near the trackside are sufficiently visible to trains or other traffic approaching at speed.

Find Out More
arc Image

EN 61482-2

Specifies requirements andtest methods applicable to materials and garments for protective clothing worn by electrical workers to protect them against the thermal hazards of electric Arc.... Specifies requi... Read More

Find Out More
arc Image

EN ISO 11611

ProGARM products are certified in accordance with this EN Standard to protect workers in welding processes by subjecting fabrics to a series of tests.

Find Out More
arc Image

EN ISO 20471

The international standard that specifies the requirements for hi vis clothing ensuring the wearer is more noticeable in hazardous situations during the day, as well as at night.

Find Out More
arc Image

EN 14404

This EN Standard relates to trousers and coveralls which offer kneepad pockets to protect the wearer when kneeling.

Find Out More
arc Image

EN ISO 11612

The requirements apply to clothing intended for a wide range of application which offer limited flame spread and provide protection against various hazards including Radiant Heat, Convective Heat and splatters... Read More

Find Out More
arc Image

EN 13034

Garments manufactured in accordance with this EN Standard are suitable for use in environments where there may be a risk of chemical splashes but where a total chemical barrier is not required.

Find Out More
arc Image

EN ISO 14116

Clothing manufactured to this standard is made from flame retardant materials so that if the material comes into contact with a flame, it will only continue to burn for a limited amount of time. After removal ... Read More

Find Out More
arc Image

EN 343

This EN Standard specifies the requirements and test methods for materials and the seams of protective clothing that has been designed to give protection against rain, snow, mist and ground moisture.

Find Out More
arc Image

EN 1149-5

The European Standard for garments that protect against electrostatic discharge in areas where there is a risk of explosion (ATEX Environments) such as petrochemical refineries and fuel distribution companies.

Find Out More

CE CERTIFICATION

Only products that have the correct CE Certification markings are guaranteed to comply with European PPE legislation.

The three categories of Regulation (EU) 2016/425 which regulates PPE, take into consideration the complexity of protective equipment. Category 1 protective equipment for instance, is of simple design and used in situations where the user can determine the necessary protection level. Category 2, on the other hand, covers equipment that is neither simple nor complex. While this is subject to external assessment, it is not subject to any EC quality assurance system.

Category 3 protective equipment is signalled on ProGARM Arc Flash and flash fire garments by a four-digit number attached to the CE Marking. This number indicates that the piece of PPE is continually checked by the relevant independent body for conformity. All ProGARM’s PPE products comply with the requirements in the PPE Regulation (EU) 2016/425.

DOWNLOAD THE CATALOGUE

Download our latest catalogue to view our unbeatable range of industry leading Arc Flash and flame resistant garments.

Download Now