Construction

SECTOR

Construction & Highways

Arc Flash protection for teams working on groundworks, roadside infrastructure, and electrical construction sites.

Protecting Construction and Highways Teams from Arc Flash Risks

Groundworks and highways construction bring teams close to buried cables, roadside electrical infrastructure, and live systems, often with large, changing workforces and subcontractors moving between sites. HSE's HSG47 guidance flags groundworks as a major source of risk, an unmarked or misjudged cable strike can trigger an arc flash with little warning.

RIDDOR doesn't track arc flash separately from general electrical incidents, so there's no clean UK figure, but HSE records around 1,000 electrical incidents a year, and in our own research, 57% of electrical workers said they'd experienced an arc flash first-hand or seen it happen to a colleague.

Protecting Construction and Highways Teams from Arc Flash Risks

AS ARC FLASH SPECIALISTS WE CAN HELP YOU

Contact Us Now

SUPPORTING STANDARDS

What Construction and Highways Teams Face

The risks that shape what your team needs to wear.

Cable Strikes and Groundworks

HSG47 identifies groundworks as a major source of risk. Digging near buried electrical infrastructure carries real arc flash exposure, even when a site looks low-risk on paper.

Roadside and Highways Visibility

Work near live traffic requires EN ISO 20471 compliant high-visibility, alongside arc flash protection. Combined kit means your team meets both standards without doubling up.

Large, Changing Workforces

Construction and highways teams often mix direct employees, subcontractors, and temporary labour. Keeping PPE standards consistent across a changing workforce matters as much as the garment spec itself.

Site Conditions and Long Shifts

Outdoor construction work means long hours in variable weather. Garments need to protect against arc flash and hold up to daily site abuse, without adding bulk that slows the job down.

Training That Actually Sticks

We ran hands-on Arc Flash training for Crown Highways, covering the real risks their team faces on site, not a generic safety briefing. It's the kind of support we mean when we talk about expertise, not just supplying kit.

Training That Actually Sticks

Feedback

What Construction customers say

In Willenhall, West Midlands, Crown Highways was appointed to support the delivery of a multi-million-pound cycle and pedestrian upgrade scheme connecting Wolverhampton and Walsall. With 18 members of its team working on site in all weathers and conditions, Crown Highways was looking for protective wear which was not only comfortable, fitted and durable, but met the required safety standards in the event of incidents such as an Arc Flash.

You get some PPE where, after 10 or so washes, it’s already starting to fade. That makes you worry about the quality of it, and whether it’s still doing its protective job. With ProGARM, I wash my kit 30 times or more, and it still looks great. It’s really durable and long-lasting and, as an added bonus, nothing needs ironing! We’ve found ProGARM brilliant to work with. From the kit itself, to the education side of things

Paul Trotter, Crown Highways

As Comfortable as Pyjamas

Our VXS+ fabric is 100% inherent, so protection doesn't wash out over time. Garments last up to 70% longer than standard alternatives, and every seam is backed by a Lifetime Guarantee. Fewer replacements, same protection.

As Comfortable as Pyjamas

CERTIFIED PRODUCTS

37 ProGARM products certified to EN 61482-2

View all

Standards that apply to the industrial electrical sector.

EN 1149-5 is the European Standard for garments that protect against electrostatic discharge in areas where there is a risk of explosion (ATEX Environments) such as petrochemical refineries and fuel distribution companies. Learn More
The requirements apply to clothing intended for a wide range of application which offer limited flame spread and provide protection against various hazards including Radiant Heat, Convective Heat and splatters of Molten Metal. Learn More
Clothing manufactured to this standard is made from flame retardant materials so that if the material comes into contact with a flame, it will only continue to burn for a limited amount of time. After removal from the flame, the material will stop burning. Learn More
The international standard that specifies the requirements for hi vis clothing ensuring the wearer is more noticeable in hazardous situations during the day, as well as at night. Learn More

Frequently asked quesitons

How do we know if we need Arc Flash PPE?

Keeping your team safe is always top priority. Your team need to be protected against an Arc Flash incident if there is a risk of one occurring whilst they work. If your teams work in industries close to sources of high voltage, there is a good chance they need protection. A first step is to conduct an Arc Flash study at your site, a risk assessment that determines the Arc Flash hazards present. An expert in electrical safety conducts the assessment so a company understands the risks their workplace poses, and how to protect against them.

What does an Arc Flash study involve?

Keeping your team safe is always top priority. Your team need to be protected against an Arc Flash incident if there is a risk of one occurring whilst they work. If your teams work in industries close to sources of high voltage, there is a good chance they need protection. A first step is to conduct an Arc Flash study at your site, a risk assessment that determines the Arc Flash hazards present. An expert in electrical safety conducts the assessment so a company understands the risks their workplace poses, and how to protect against them.

Who needs to carry out an Arc Flash study?

Keeping your team safe is always top priority. Your team need to be protected against an Arc Flash incident if there is a risk of one occurring whilst they work. If your teams work in industries close to sources of high voltage, there is a good chance they need protection. A first step is to conduct an Arc Flash study at your site, a risk assessment that determines the Arc Flash hazards present. An expert in electrical safety conducts the assessment so a company understands the risks their workplace poses, and how to protect against them.